Steam heating vacuum rake drying machine vacuum dryer

Description of Vacuum Rake Dryer:

Vacuum drying is to put the dry material heated drying under vacuum condition. It is the use of vacuum pump for suction wet make work indoor vacuum state, accelerates the drying speed. Can get higher under the low temperature drying, Heat use fully. Can dry or dry heat-sensitive materials at low temperature, especially suitable for dry material containing solvents and solvent to be recovered. The machine adopts interlayer heating mode, heat transfer surface is big, high thermal efficiency, set up the stirring, within the cylinder form a continuous loop of material state, further improving the heating uniformity of the material. Applicable to the pharmaceutical, chemical, food, electronics, medicine and other industries dry heat-sensitive materials.

ZPG vacuum rake dryer equipment is designed for drying slurry, pasty, powdery materials, thermosensitive materials requiring low-temperature drying, easily oxidized materials, as well as explosive materials, toxic materials and the materials whose organic solvents should be recovered. This vacuum Drying Equipment is applied to the pharmaceutical, nourishment, food, chemical and other industries.

Features of Vacuum rake dryer:

1. Being installed stirrer in the machine, it makes raw material form the state of continuous circle inside the body, so heating uniformity of raw material is raised greatly.
2. Being installed stirrer in the machine, slurry and paste shape material can be dried easily.
3. Special design for discharging port, make better sealing and less material accumulation, discharge is easy.
4. There are two seal model, mechanical seal and packing seal. The design supply good seal and long life.
5. The special techniques of shaft and rake support high strength and concentric.
6. The medium in shaft and vibration adding equipment will be equipped by requirement
7. Use different filter form according to different material.

Parameters of Vacuum rake dryer: